40 electrolux installation

Note

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

In the interest of the environment

SHOWER

 

 

 

SINK

TOILET

BATH

 

BIDET

WASHING

DISHWASHER

MACHINE

RAINWATER

 

 

'RUN-OFF'

 

 

 

 

FOUL DRAIN

SURFACE WATER

 

FOUL SEWERS

DRAINS & SEWERS

 

 

 

 

 

SEWAGE

UNTREATED

 

TREATMENT

DISCHARGE

 

WORKS

 

 

TREATED

 

 

DISCHARGE

RIVER

 

RIVER

 

 

P0987

 

 

Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.

It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Important!

This appliance must be earthed. The manufacturer declines any liability should this safety measure not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate.

Important!

Information on the electrical connection is given on the rating plate on the inner edge of the appliance door.

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

-

Neutral

 

Brown

- Live

Page 40
Image 40
Electrolux EWN 16781 W user manual Interest of the environment, Electrical connection