
12 how to run a wash cycle
Lightly soiled laundry
Very lightly soiled laundry or half
load
The availability of these different levels varies depending on the selected pro- gramme type.
Start of the programme
Press the “Start/Pause” pushbutton to start the cycle ; the correspon- ding light will come on
green.
Interrupting a programme
Adding washing
When the “Add washing” light is on, you can add washing by proceeding as follows.
Press the “Start/Pause” pushbutton : the corresponding light will flash green while the appliance is paused and the message “Pause” is displayed. The loc- king mechanism “snaps” twice to indi- cate that the lid is open. Press the “Start/Pause” pushbutton again to con- tinue the programme.
Modifying the programme in pro-
2.00 gress
It is normal for the programme selector to remain stationary during the cycle. The symbol for the current cycle and the remaining time appear on the display.
2H
Before making any changes to the cur- rent programme, you need to pause the washing machine by pressing the “Start/ Pause” pushbutton. If the modification is not possible, “Err” flashes in the display and the “Start/Pause” pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below).
If a delayed start has been selected, the countdown appears on the display (hour by hour, then 90, and minute by minute from 60 min).
Warming up
During the cycle, the symbol comes on when the appliance is reaching the right temperature.
Cancelling the programme
If you want to cancel the programme, turn the programme selector to the “Stop” position .
End of the programme
The washing machine stops automatically ; the “Start/Pause” pushbutton goes out and “0” flashes on the display. The locking mechanism “snaps” twice to indicate that the lid is open.