• Temporary :
Press the “Rinse plus” pushbutton 
. The option is only active for the selected programme.
• Permanent :
how to run a wash cycle 11
You can change or cancel the delayed start time at any time before you press the “Start/Pause” pushbutton, by pres-
sing the “Delay start” 
pushbutton again (0’ indicates immediate start).
If you have already pressed the “Start/ Pause” pushbutton and you want to change or cancel the delayed start, pro- ceed as follows :
•To cancel the delayed start and start the cycle immediately, press “Start/Pau- se” and then “Delay start” 
. Press “Start/Pause” to start the cycle.
•To change the timer delay period, you must go through the “Stop” position and reprogramme your cycle.
Hold down the “Spin” 
and “Rinse
plus” 
pushbuttons for a few se- conds. The option is permanently acti- vated, even if the appliance is switched off.
To deactivate it, repeat the process.
“Delay start” option 
30’ 
This option allows you to delay the start of a wash programme by 30, 60, 90, 2 hours to 20 hours.
The selected time appears on the display for a few seconds*.
**The light does not come on.
The lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pres- sing the “Start/Pause” pushbutton. After closing the lid again, press the “Start/ Pause” pushbutton.
Time Manager
The washing machine will suggest the “Normally soiled laundry” cycle by de- fault. The cycle can be made longer or shorter by using the “Time Manager” 
pushbuttons. The level of soiling of the laundry is also indicated.
Heavily soiled laundry
Normally soiled laundry
