Leak Prevention System, Off | Electrolux FAVORIT 50730 guide

Installation and Connection Instructions

	Leak Prevention System
	For protection from damage due to water leaks, the dishwasher is
	equipped with a leak prevention system, the AQUA CONTROL SYSTEM.
	In the event of a fault, the safety valve in the appliance immediately
	interrupts the inflow of water and the drain pump is activated. By this
	means water can neither escape nor overflow. The remaining water in
	the appliance is automatically pumped out.
1	The leak prevention system also works when the appliance is switched
	off.

Page 39

Image 39

Electrolux FAVORIT 50730 manual Leak Prevention System, Appliance is automatically pumped out, Off

Contents

Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefully Contents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child Safety Correct Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging Material Appliance Features and Control Panel Which fault has occurred on the dishwasher Control panelNing Panel Prior to using for the first timeAdjust the water softener Your area Ing the appropriate button Dishwasher must be switched offManual setting Electronic setting Turning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower Rack To switch off the control indicator for rinse aid Rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Loading Cutlery To ease the loading of large items Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower rack Over to the left Two rear plate inserts in the lower Folded across one anotherAcross one another To ease the loading of large items Loading Cups, Glasses and Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with Detergent General Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated Detergent Soiling Selecting the Wash Programme Programme Table Open the door carefully Start the wash programmeInterrupting or ending the wash programme Washer Pause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timer Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Load Sensing Sensor Logic Cleaning the Filter What to do, if Fault warnings are displayed Dishes are wet and dull There are problems operating the dishwasherWash results are unsatisfactory Dishes are still dirty Technical Data Decrease rinse aid dosingThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangements Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under Dishwasher Work surface must be re-mounted Plinth on free-standing appliances is not adjustable Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressure Please take care when installing the water inlet hose Water inlet hose with safety valve Water drain Leak Prevention System Appliance is automatically pumped outOff Changing a fuse Electrical Connection Connections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

Leak Prevention System

the appliance is automatically pumped out.

off.