Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary.

Interrupting the dishwashing programme by opening the dishwasher door

1 Hot steam may escape when the door is opened. There is a risk of scald- ing.

1.Open the door carefully. The dishwashing cycle will stop, in the display:

PLEASE CLOSE DOOR

2.Close the door. The cycle will continue.

Aborting the dishwashing cycle

1.Press the RESET button.

In the display: CONFIRM CANCEL ?

2.Press the OK/START button.

The programme is cancelled. In the display: CHOOSE PROGRAMME

3.If you want to start a new dishwashing cycle, check whether there is any detergent in the dispenser.

3 Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dishwasher back on again.

Setting the delay start

3 With the delay start you can delay the start of a dishwashing cycle for between 1 and 19 hours. First of all set the delay start and then the desired dishwashing cycle.

1.Go to the DELAY START option; see section “Adapting an option/set- ting”.

2.Set the period by which you wish to delay the start in hours. In the symbol line of the display .

3.Press the OPTION button, to change to the Programmes menu.

4.Select programme and start.

First of all the pre-set time delay until the start runs down. In the dis- play you see the time remaining until the start of the dishwashing cy-

cle. After the time delay until the start has elapsed, the dishwashing cycle starts automatically, the symbol goes out.

27