What to do if …

Resetting the language

You can reset the language of the display to the factory setting at any time. As well as the language, the CONTRAST and BRIGHTNESS settings are also reset.

1.Press the RESET button repeatedly until the display in the display no longer changes.

2.Press and hold the RESET button for six seconds.

In the text line LANGUAGE ENGLISH appears. The word ENGLISH flash- es.

3.Using the direction buttons or select the desired language.

4.Press the OK/START button.

5.If required, adjust the values for CONTRAST to BRIGHTNESS; see the section “Basic operation”.

Remedying small malfunctions

If one of the following fault messages is displayed in the display during operation:

–OPEN THE TAP

–DRAIN BLOCKED

Remedy the fault, then re-start the dishwashing cycle. The cycle will continue.

In the case of other fault messages:

–Cancel the dishwashing cycle.

–Switch the appliance off and on again.

–Select dishwashing cycle.

–Press the OK/START button.

If the fault is displayed again, please contact the Customer Care Department and inform them of the fault message.

30