Electrolux FAVORIT 88070 i If the dishwashing results are not satisfactory, The dishes are still dirty

Malfunction	Possible cause	Remedy
	The mains plug is not	Plug in mains plug.
	plugged in.
	A fuse in the house’s wiring	Replace fuse.
The cycle is not starting.	system is defective.
	For dishwasher models with	If the dishes are to be
	a delay start timer:	washed immediately, cancel
	A start time has been select-
		the delay start.
	ed.
	The dishwashing compart-
	ment is made from rust-free
	stainless steel. Rust spots in
Rust spots are visible in	the washing compartment	Only wash cutlery, dishes and
	are due to rust particles
the dishwashing com-	from external sources (rust	pans that are suitable for
partment.	particles from water pipes,	dishwasher use.
	pans, cutlery, etc.). Remove
	such spots with a commer-
	cially-available cleaning
	product for stainless steel.
A whistling noise can be	The whistling is not a cause	Use a different brand of de-
heard when washing	for concern.	tergent.
dishes.
	The mains plug is not	Plug in mains plug.
The dishwasher interior	plugged in.
light does not come on.	The bulb in the interior light	Contact the Customer Care
	is faulty.	Department.

If the dishwashing results are not satisfactory

The dishes are still dirty.

•The wrong dishwashing cycle was selected.

•The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overload- ed.

•The filters in the base of the washing compartment are dirty or incor- rectly positioned.

•Good quality detergent was not used, or too little was used.

•In the case of scale deposits on the dishes: The special salt dispenser is empty or the water softening system has been incorrectly set.

•The drain hose is incorrectly positioned.

32