11.Place original washer (some models) over hole in refrigerator door and line up hole in center hinge. Insert hinge pin through both holes. Place washer (some models) on hinge pin, then position freezer door on center hinge.
12.Remove plug from upper bearing of door and reinstall on opposite side.
Bearing Plug |
13. Assemble upper hinge to top of cabinet and door. Use opposite set of holes. Do not completely tighten screws.
Align doors so there is a parallel gap between doors. Original shipping block may be used to align doors. Adjust doors to cabinet so gaskets seal but do not bind. Tighten upper and lower hinge screws.
Additional adjustment may be necessary after loading the door shelves. Return food, bottles, and other articles to doors. Turn the refrigerator control on and to the previous setting.
Wait 24 hours for the temperature to stabilize before making additional changes.
Refer to the Toe Grille Instructions on page 13 to replace the Toe Grille (some models).
12
