Electrolux - Gibson Top Freezer Frost Clear Refrigerator manual Occurrencesolution

Models: Top Freezer Frost Clear Refrigerator

1 20
Download 20 pages 35.3 Kb
Page 15
Image 15
OCCURRENCESOLUTION

OCCURRENCESOLUTION

TEMPERATURES ARE TOO WARM

Temperature in the freezer is too warm. Freezer control is set too warm. Set the freezer control to a colder setting until the freezer temperature is satisfactory. Allow 24 hours for the temperature to stabilize.

Temperature in the refrigerator is too warm Refrigerator control is set too warm. Refrigerator control has some effect on freezer temperature. and the freezer temperature is satisfactory. Set the refrigerator control to a colder setting. Allow 24 hours for the temperature to stabilize. Then, if the freezer temperature is not right, set the freezer control to a warmer setting. Refer to Setting the

Controls.

Temperature in the Meat Keeper (some Adjustable air flow control is set too warm. Adjust the adjustable air flow control to a colder setting. models) is too warm.

WATER/MOISTURE/FROST INSIDE REFRIGERATOR

Moisture collects on inside of refrigerator walls.

Weather is hot and humid which increases rate of frost buildup and internal sweating. This is normal.

Door is slightly open. See Occurrence section OPENING/CLOSING OF DOORS/DRAWERS.

Door is opened too often or too long. Open the door less often.

Water collects on bottom side of drawer cover.

Vegetables contain and give off moisture. It is not unusual to have moisture on the bottom side of the cover.

Water collects in bottom of drawer.

Washed vegetables and fruits drain while in the drawer. Dry items before putting them into drawer. Water collecting in bottom of drawer is normal.

WATER/MOISTURE/FROST OUTSIDE REFRIGERATOR

Moisture forms on outside of refrigerator or between doors.

Weather is humid. This is normal in humid weather. When humidity is lower, the moisture should disappear. Set the Moisture Reduction Switch to the “ON” position.

Door is slightly open, causing cold air from inside the refrigerator to meet warm air from outside. See

Occurrence section OPENING/CLOSING OF DOORS/DRAWERS.

AUTOMATIC ICE MAKER (some models)

Ice maker is not making any ice.

Ice maker wire signal arm is in "up" or OFF position. Move wire signal arm to "down" or ON position.

 

 

 

Household water line valve is not open. Turn on household water line valve.

 

 

 

Freezer is not cold enough. See Occurrence section TEMPERATURES ARE TOO WARM.

 

 

 

Saddle valve on cold water pipe is blocked or restricted by foreign material. Turn off household water

 

line valve. Remove, clean or replace valve.

Ice maker is not making enough ice.

Ice maker is producing less ice than you expect. Ice maker should produce approximately 2 1/2 to 4 pounds of ice every 24 hours.

Freezer is not cold enough. See Occurrence section TEMPERATURES ARE TOO WARM.

Household water line valve is not completely open. Turn on household water line valve.

Water supply valve in refrigerator is being blocked by foreign material. See Occurrence, "Ice maker is not making any ice" above.

Ice maker will not stop making ice.

Ice maker wire arm is being held down by an item in the freezer. Remove item and release arm. Remove any ice cubes which are frozen together over arm.

Ice maker is not separating the cubes.

Ice cubes are not being used frequently enough. Remove and shake ice bucket to separate cubes.

 

 

Ice has bad odor and taste.

Ice has picked up odor or flavor from strong food stored in refrigerator or freezer. Cover foods tightly.

 

Discard stale ice. Ice maker will produce fresh supply.

 

 

 

Water running to ice maker has poor taste or odor. Add filter to ice maker. Consult a water

 

purifying company.

 

 

 

Interior needs to be cleaned. Clean interior with sponge, warm water and baking soda.

 

 

 

Food with strong odor is in refrigerator. Cover food tightly.

15

Page 15
Image 15
Electrolux - Gibson Top Freezer Frost Clear Refrigerator manual Occurrencesolution, Temperatures Are Too Warm