Apply covers B into the relevant holes | Electrolux K 7 18 40 - 1i

Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges.

Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap ventilation grille (C) and hinge cover (D) into position.

	D
D723/2	C

Apply covers (B) into the relevant holes.

D726

B

Separate parts A, B, C, D as shown in the figure

A B

C

D

PR266

21

Image 21

Electrolux K 7 18 40 - 1i Apply covers B into the relevant holes, Separate parts A, B, C, D as shown in the figure

Contents

Santo K 7 18 40 Who thinks ecologically acts accordingly Dear customer Contents Safety of children SafetyIntended use Prior to initial start-up Disposal ServiceDaily Operation Appliance Packaging Information Disposal of old Appliances Remove transport packaging Setting 0 Off Starting up and temperature regulation Fresh food refrigeration Interior AccessoriesStorage Shelves Variable Inner Door Freezing and storing frozen food Defrosting Preparation of Ice Cubes Cleaning and Care Switching off the appliance Energy Saving Tips Cleansers which contain acetic acid Something Not Working Symptom Possible Cause Remedy Put the refrigerator back into operation Changing the light bulb Service and Spare Parts 0870 5Customer Care Department Guarantee Conditions Guarantee Conditions Electrical Connection Installation Positioning Your appliance needs airReversing the door Inner door reversal Housing dimensionsHeight Depth Apply joint the sealing strip as shown in figure Instructions for building-in Separate parts A, B, C, D as shown in the figure Apply covers B into the relevant holes Fix cover C on guide a until it clips into place Fix cover D on guide B until it clips into place Regulations, Standards, Guidelines 2222