If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre.

In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for any in-guarantee service calls.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it. Light bulb data: 220-240 V, max. 15 W

1.To switch off the appliance, turn the temperature control knob to position "0".

2.Unplug the mains plug.

3.To change the light bulb, remove the screw from the light bulb cover.

4.Unhook the light bulb cover as shown.

5.Change the defective light bulb.

6.Refit the light bulb cover and the screw.

AEG65

7.Put the refrigerator back into operation.

14

Page 14
Image 14
Electrolux K 7 18 40 - 1i installation instructions Changing the light bulb, Put the refrigerator back into operation