Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied.
50mm | A |
PR166 |
|
Fix cover (C) on guide (A) until it clips into place.
A
C
PR33
Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni- ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
8mm |
A |
B |
PR167 |
22
