Electrolux K 7 18 40 - 1i Instructions for building-in

Push appliance into the housing

until stop strip (A) touches the

kitchen unit.

Instructions for building-in

D765

Apply joint the sealing strip as shown

in figure.

13mm

D740

Ø 2,5

An additional midpoint location

bracket may be fitted to the appli-

ance (as shown) to assist retention of

the housing side wall.

Drill the unit using a ∅2,5 mm drill

(10 mm max. penetration.

Fix the square fitting (1) to the appli-

ance.

D015/1

Contents

Main Dear customer, Contents Safety Intended use Prior to initial startup Refrigerant Safety of children Disposal Appliance Packaging Information Remove transport packaging Disposal of old Appliances Starting up and temperature regulation Interior Accessories Storage Shelves Variable Inner Door Fresh food refrigeration Freezing and storing frozen food Preparation of Ice Cubes Defrosting Switching off the appliance Cleaning and Care Warning! Energy Saving Tips Something Not Working Changing the light bulb Service and Spare Parts 0870 5 929929 Customer Care Department Guarantee Conditions Guarantee Conditions European Guarantee Installation Electrical Connection Positioning Your appliance needs air Reversing the door Housing dimensions Inner door reversal Instructions for building-in Page Page Regulations, Standards, Guidelines