electrolux EXP09CS1WIelecinstallationrolux EXP09CS1WIand removal offront/rearexhaust hoseview
Installation and removal of exhaust hose
Installation without “window kit”
The exhaust hose must be installed or removed in accordance with the usage mode.
The exhaust hose should be as short as possible for operational efficiency; however, it must not be twisted or bent.
Mode | Exhaust hose | Unacceptable | |
Cool, fan, ventilation | Install | ||
| |||
Dehumidification | Remove |
|
Installation of the exhaust hose
1.Attach the insect guard net to the exhaust adapter.
Push the insect guard net firmly to ensure that four projections on the exhaust adapter fit into the four holes on it.
| Projection |
|
Exhaust adapter | Hole | Acceptable |
|
Exhaust hose | Extend | Insent |
| guard net | |
|
|
2.Attach the Exhaust adapter to the exhaust hose.
Extend one end of the exhaust hose and insert it into the Exhaust adapter, and turn it (approx. three times) until it stops.
Make sure they are securely attached afterwards.
Projection
Hole
3.Attach the exhaust hose adapter to the unit.
Insert the two projections on the exhaust hose adapter into the two holes on the unit, and firmly attach them to each other.
Acceptable
Removal of the exhaust hose
1.Remove the exhaust hose adapter from the unit.
Lift up and remove the exhaust hose adapter from the unit by pushing down on the two projections.
Projection