Installation in a sliding sash window
1.Connect the rain guards to the insect guard net
•Insert all three projections on each rain guard into the holes in the insect guard net.
•Side “A” will now be uppermost, as indicated in the diagram.
“A”
Insect guard net |
| |
Hole | Rain guard | |
Projection | ||
|
2.Attach the guard combined with insect guard net to the window panel
•Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel.
•Side “A” will now be at the top, as indicated in the diagram, when it is installed in the window.
Window panel
electroluxelectroluxEXP09CS1WIEXP09CS1WIinstallationfrofnt/rearwindowviewkit 11
3.Cut the foam seal A (adhesive type) to the proper length and attach it to the window frame
Foam seal A (adhesive type)
4. Install the window panel into the window frame
(A) If the inner height of the window is between 559mm and |
609mm inclusive: |
The window panel cannot be installed in windows less |
than 559mm high, as you will be unable to shut the |
exhaust cover. |
In such cases the exhaust cover will have to be removed |
prior to installing the window panel. |
• Remove the adjustment panel from the window panel, |
and cut the window panel to the same height as the |
window. |
• Open the window sash and place the window panel |
on the window frame. |
Projection 
“A”
• Secure the window panel to the window frame with 2 |
screws. |
| Exhaust cover | |
Window | Cut | |
panel | ||
|
