Electrolux PE 9038-m fww Installation, Building-In, Components For Installing The Machine, 29/35

14 INSTALLATION

BUILDING-IN

Installing the machine into kitchen furniture with proper characteristics will ensure a correct operation of the equipment.

Complying with the safety rules, ensure a proper protection against any contact with the electric components and with the parts protected only by functional insulation, by housing the machine correctly into the furniture.

All components that guarantee protection, even a cover panel (for instance, when the machine is positioned at one of the ends of the modular furniture), should be firmly fixed so that they cannot be removed without tools.

Install this machine at a certain distance from refrigerators or freezers, because the heat it emits can impair their functioning.

COMPONENTS FOR INSTALLING THE MACHINE

This coffee machine and drawer can be installed into cabinets with height of 450 mm and width ranging from 560 mm to 570 mm. The machine is equipped with the following components for the installation:

1.1 fixing base

2.9 self-threading screws

3.9X19

3.1 cable clamp

4.2 side slides

5.2 side-plates of 1 mm

6.4 side-plates of 2 mm

29/35