Initial Start-Up, 12/35 | Electrolux PE 9038-m fww specification

INITIAL START-UP

•Pour approximately 200g of coffee beans into the container on the top as shown in the figure.

•Push the machine back into the housing until a “CLICK” can be heard. This indicate that the machine has been locked in position.

INITIAL START-UP

•Put the main switch in position 1

•The led corresponding to the ON-OFF control will blink rapidly for 3 minutes.

12/35

Image 12

Electrolux PE 9038-m fww installation instructions Initial Start-Up, 12/35

Contents

Operating and Installation Instructions PE 9038-mFully automatic espresso coffee machine ENGLISH CONTENTS 1. SAFETY INSTRUCTION Safety of childrenIntended use Prior to initial start-up FOR INSTALLATION AND SERVICING SOME HINTS OF ENVIRONMENTAL PROTECTIONPACKAGE ELECTRICAL CONNECTION WARNING THIS APPLIANCE MUST BE EARTHED5/35 PERMANENT CONNECTION 6/35 2. DESCRIPTION OF THE COFFEE MACHINE 1. Water reservoir 2. Brita filter 3. Coffee Outlet4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS TOUCH CONTROLS Instructions for use 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE FILLING UP THE WATER RESERVOIR9/35 Hardness of water 10/35 FILLING UP THE CONTAINER WITH COFFEE BEANS 11/35 INITIAL START-UP 12/35 ADJUSTING THE TEXTURE GROUND COFFEE 13/35 14/35 STAND-BY MODE 15/35 HOW TO OBTAIN AN EXCELLENT ESPRESSO 5 MAKING COFFEE16/35 6 HOT WATER 17/35 7 STEAM HEATING LIQUIDS 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED 19/35 20/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP 21/35 10 IF YOU WISH TO RESET THE STANDARD VALUES RESETTING STANDARD VALUES22/35 11 SIGNAL AND ALARMS WATER REFILL INDICATORVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR FAULT INDICATOR 12 COFFEE MENUSITALIAN CAPPUCCINO VIENNESE CAPPUCCINO 13 CLEANING OUTER PARTSSTEAM NOZZLE 25/35 DRIP TRAY TO EMPTY THE “USED” COFFEE DRAWER26/35 Pull open the door and remove the drawer and empty it Replace the drawer and close the door Replace the drip tray27/35 CLEANING CYCLE OF THE BOILER WATER RESERVOIR28/35 14 INSTALLATION COMPONENTS FOR INSTALLING THE MACHINEBUILDING-IN 29/35 Fix the power cable onto the machine as shown in the figure Unscrew the cable clamp available on the machine30/35 INSTALLING THE MACHINE 31/35 32/35 16 TECHNICAL SPECIFICATIONS 15 SOMETHING NOT WORKING33/35 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE SERVICE & SPARE PARTS08705 929 CUSTOMER CARE GUARANTEE CONDITIONS EUROPEAN GUARANTEE35/35 AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG04501150