To start the wine cooler and set the correct temperature
Switching on:
Switch on the wine cooler by pressing the power switch.
12
+
+
+
Setting the temperature
Press the buttons until the desired temperature flashes in the temperature display (The temperature can be set between +6°C and +17°C.)
"+" raises the temperature.
12
Once set, the temperature display shows the current temperature inside the cabinet.
NOTE: The controllable area is limited by a room temperature of 17°C or below.
Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet.
It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use. The thermostat recalls the previously set temperature.
Temperature inside the wine cooler
NOTE: The picture shows the coldest and warmest places inside the fridge. (+ warm, - cold)
-
-
+
Wine Placement
Storage tips
The amount of time to store wine depends on its maturity, type of grape, alcohol content, and dissolved fruc- tose and tannins. When purchasing your wine, find out whether it is mature or if it will improve over time.
In the lower part of the cooler. Cold air prolongs the time to maturity. Accord- ingly, store old and mature wine as well as wine you would like to store for a long time in the lower portion of the cooler. The lower part should also be used to store wine that is to be served cold.
In the upper part of the cooler. In the upper part, store wine that you wish to let further mature, wines that are served at a warmer temperature, and those wines you intend to consume relatively soon.
66
