Door Reversal
1.Close the cabinet and remove the plug from the electrical socket.
2.Remove the ventilation grille. There is a part on the grille that can be removed. Remove and reposition it on the other side.
3.Put the cabinet on a wooden board when it is laid down. Later, when raising the cabinet, it will be easier to grip under the cabinet thanks to the board.
4.On the upper part of the cabinet. Put the hinge pin on the other side. On the lower part of the cabinet.
Unscrew the hinge. Move the hinge pin and plastic cover. Secure the hinge on the other side.
Remove any play in the door by adjusting the height of the lower hinge with the supplied spanner. Secure with the
5.Raise the cabinet and replace the ventilation grille.
6.Move the handle.
Unscrew the handle and secure it to the other side. Press the supplied plastic plugs into the holes to which the handle was previously fitted.
7.Put the cabinet in position. Check that the appliance is level. See the section "Positioning the cabinet".
75
1 |
2 |
3 |
4 |
6
