Kenmore 721.80042, 721.80049, 721.80043, 721.80044 The Following Parts Are Supplied With The Oven

THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:

NOTE: Depending on your ventilation requirements, you may not use all of these parts.

Damper/duct connector

(for roof vented or wall vented installation) Not Actual Size

One power cord clamp bushing

Four 1/4" x 2" lag screws - Actual Size (for wall stud holes)

C--

Two 1/4" x 3" bolts - Actual Size

(for securing to the upper cabinet)

OR

Four spring toggle heads - Actual Size (for the toggle bolts)

One power cord clamp and

One dark-coloredmounting screw (to hold the power cord)

Actual Size

-Actual Size (for the cord hole in a metal upper cabinet)

Four 1/4" x 3" toggle bolts - Actual Size (for drywall holes)

Two tapping screws - Actual Size

(for attaching the damper duct connector)

One upper cabinet template - Not Actual

Size

i

One rear wall template- Not Actual Size

_:_.

REARWALL TEMPLATE

NOTE: You need to install at least one lag screw into a 2" x 4" stud and four anchor bolts into the wall, and the mounting area must meet the 150 Ibs. weight requirement.