PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape
(for taping the templates to the wall)
Saber saw (for cutting vent holes for roof or wall venting)
Phillips screwdriver (for the screws)
Pencil
Stud finder or thin nail.
Key hole saw (for the power cord hole)
ill
3/8" and 3/4" wood drill bits ,_
1/2" and 3/16" drill bits
Flat blade screwdriver (for the bolts) | Plumb line |
Measuring tape (metal preferred) | Duct Tape |
Small side cutters or tin snips | Caulking gun |
•If you have brick or masonry walls, you need special hardware and tools.
•The ductwork you need for the installation is not included. All wall and roof caps must have a