REPLACING AN OVEN LIGHT BULB

Disconnect the appliance from the electricity supply before replacing the bulb.

The second oven requires a 300°C 25 watt small Edison Screw bulb.

The main oven requires a 300°C 20 watt heat - resistant halogen bulb. Always use a cloth to take hold of a halogen light to avoid burning on of fatty deposits.

1.Make sure the appliance is cool before you replace a bulb.

2.Open the door and remove the shelves and wirework runners.

3.Pull the glass bulb cover towards you and then pull it off. If necessary use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.

4.(Second Oven) Unscrew the bulb by turning it to the left.

5.(Main Oven) Gently pull the bulb out.

6.Fit a new bulb and then replace the glass bulb cover.

7.Refit the wirework runners and replace the oven shelves.

8.Restore the electricity supply and reset the time of day.

38

Page 38
Image 38
Electrolux U7101-4 operating instructions Replacing AN Oven Light Bulb