•Motor protection tripped, e.g. by insufficient cooling (cooling fins cov- ered).
−Switch compressor OFF at the On/Off switch; remove cause for overheating; let cool off for approx. 10 minutes; reset the motor protection switch; switch compressor ON again at the On/ Off switch.
Compressor runs but does not build up sufficient pressure.
•Condensate drain of pressure ves- sel leaky.
−Check gasket of drain cock(s); replace if necessary.
−Tighten drain cock(s) fingertight.
•Check valve leaky.
−Have check valve serviced by qualified service centre.
Air tool is not supplied with sufficient pressure.
•Pressure regulator not opened wide enough.
−Open pressure regulator more.
•Hose connection between compres- sor and air tool leaky.
−Check air hoses, replace defec- tive parts if necessary.
8. Repairs
ADanger!Repairs to power tools must be carried out by qualified electricians only!
ENGLISH
Electric tools in need of repair can be send to the service centre in your coun- try. See spare parts list for address.
Please attach a description of the fault to the power tool.
9. Environmental protection
The machine's packaging can be 100 % recycled.
Worn out devices and accessories con- tain considerable amounts of valuable raw and plastic materials, which can be recycled.
These instructions are printed on chlo-
10. Technical specifications
Suction capacity | l/min | 290 | |
|
|
| |
Free air delivery (volume flow rate) | l/min | 165 | |
|
|
| |
Filling rate | l/min | 195 | |
|
|
|
|
Working pressure (compression end pressure) | bar | 10 |
|
|
|
|
|
Pressure vessel volume | l | 50 |
|
|
|
|
|
No. of air outlets |
| 2 |
|
|
|
| |
Compressor pump model |
| B 2800 | |
|
|
|
|
No. of cylinders |
| 2 |
|
|
|
| |
Speed (compressor pump) | 1300 | ||
Motor capacity | kW | 2.0 |
|
|
|
| |
Supply voltage (50 Hz) | V | 400 | |
|
|
|
|
Rated current | A | 3.7 |
|
|
|
|
|
Fuse protection min. | A | 10 | |
|
|
| |
Degree of protection |
| IP 44 | |
|
|
|
|
Maximum overall length when using extension cables with: |
|
|
|
– 3 x 1.5 mm2 lead | m | 100 | |
– 3 x 2.5 mm2 lead | m | 160 | |
Oil grade |
| 10 | W 40 |
|
|
| |
Oil qantity for oil change | l | 0.21 | |
|
|
| |
Dimensions: length x width x height | cm | 88 x 49 x 77 | |
|
|
|
|
Weight | kg | 46 |
|
|
|
|
|
Sound pressure level LPA at 4 m maximum | dB (A) | 71 | ± 3 |
Sound power level LWA | dB (A) | 91 | ± 3 |
15
