•Blow Gun BP 70 (not illustrated) light metal body
(with 100 mm extension nozzle).
•Blow Gun BP 60 (not illustrated) light metal body (short).
Driving screws
IImpact Wrench SR 230
rugged impact wrench for DIY and automotive applications.
•Impact Wrench SR 340 Set (not illustrated)
professional version; many acces- sories included.
•Impact Wrench SR 140 Set (not illustrated)
for multiple DIY and automotive applications; complete with many accessories.
•Impact Wrench SR 120 Set (not illustrated)
requires only minimal amount of air, thus can be run on small compres- sors; complete with many accesso- ries.
•Ratchet Wrench RS 320 (not illustrated)
due to narrow design and rubber- covered ratchet head it is well suited for automotive applications and work in confined areas.
•Ratchet Wrench RS 220 Set (not illustrated)
this set comes complete with many accessories.
•Air Screwdriver DS 1610 (not illustrated)
reversible with quick reversing action.
Spraying
JSpray Gun SPP 161
for spraying degreaser, oil, liquid wax, etc.
•Combination Spray Gun UBS 820 (not illustrated)
for commercially available 1.0 l
Air hoses
KHose Reel ST 200
swivels through 360°; with 30 m PU air hose.
•Braided Air Hose (not illustrated) c/w quick coupler and male plug; length 5 m; outer diameter 12 mm; inner diameter 6 mm.
•Braided Air Hose (not illustrated) c/w quick coupler and male plug; length 10 m; outer diameter 12 mm; inner diameter 6 mm.
•Braided Air Hose (not illustrated) c/w quick coupler and male plug; length 10 m; outer diameter 15 mm; inner diameter 9 mm.
•Bulk Braided Air Hose (not illus- trated)
length 50 m; outer diameter 15 mm; inner diameter 9 mm.
•
c/w quick coupler and male plug;
2.5m working length; outer diame- ter 8 mm; inner diameter 6 mm.
•
c/w quick coupler and male plug; 7.5 m working length; outer diameter 8 mm; inner diameter 6 mm.
•
c/w quick coupler and male plug;
10.0m working length; outer diame- ter 10 mm; inner diameter 8 mm.
•
(not illustrated)
c/w 20.0 m braided air hose; outer diameter 15 mm; inner diameter 9 mm.
•Automatic Retractable Hose Reel SA 200
(not illustrated)
suitable for wall and ceiling mount- ing; retracts automatically by simply pulling on hose; with 8 m PU air hose; outer diameter 13 mm; inner diameter 8 mm.
Accessory kits
LAccessory Kit LPZ
comprising: blow gun, tyre inflator gauge, tyre valve adaptor, ball valve needle, paint spray gun, spray gun,
•Accessory Kit LPZ
ENGLISH
•Accessory Kit LPZ
•Accessory Kit LPZ 4 (not illustr.) comprising blow gun, tyre inflator gauge, paint spray gun,
•Accessory Kit LPZ 2 (not illustrated) comprising change handle with blow gun, tyre inflator gauge, paint spray gun,
7. Trouble shooting
ADanger!Prior to all servicing:
−Switch Off.
−Unplug.
−Wait until the device has come to a complete stop.
−Ensure the device and all air tools and accessories connected to it are relieved from pressure.
−Let the device and all air tools and accessories used cool off.
After all servicing:
−Check to see that all safety devices are operational.
−Make sure that no tools or other parts remain on or in the device.
Compressor does not run:
•No mains voltage.
−Check cables, plug, outlet and mains fuse.
•Mains voltage too low.
−Use only extension cables with sufficient lead cross section (see "Technical specifications"). Avoid using extension cable when device is cold.
•Compressor was stopped by unplugging.
−Switch compressor OFF at the On/Off switch, then ON again.
•Motor protection tripped, e.g. by insufficient cooling (cooling fins cov- ered).
−Switch compressor OFF at the On/Off switch; remove cause for overheating; let cool off for approx. 10 minutes; reset the motor protection switch; switch compressor ON again at the On/ Off switch.
Compressor runs but does not build up sufficient pressure.
•Condensate drain of pressure ves- sel leaky.
13
