Elk M1KPAS specifications Application, Features, Specifications, Keypad Arming Station

Keypad Arming Station ELK-M1KPAS

APPLICATION

The ELK-M1KPAS is an easy to use, slim line keypad for use in arming and disarming any of the M1 Family Cross Platform Controls. It fits into a single gang electrical box and utilizes any standard decorator style faceplate. It handles basic functionality and displays system status using 3 LEDs: Green for "Ready", Yellow for "Trouble", and Red for "Armed". The low cost and small footprint of the M1KPAS Arming Station makes it ideal for use as an alternative to the larger and more costly LCD keypads. It is particularly well suited for partitioned jobs such as an office, workshop, garage, etc., where full functionality is not necessarily required. The 12 button keypad is backlighted with blue LEDs and has quick arm keys for Exit (Away) and Stay. It also has a "F" key (function key) for use in in activating 1 of 6 programmable function operations.

FEATURES

!Blue/white Backlighted 12 button keypad

!Access to six (6) Programmable Functions

!Operates from the M1/EZ8 'RS-485' Data Bus

!Built-in Piezo Mini Sounder

!Quick arm keys for Exit and Stay

!Flush mounts into a standard electrical box. **

!Utilizes a standard decorator style electrical cover plate (not included).

SPECIFICATIONS

!Connection: 4 Pin Plug-in "Flying Lead" Connector (Included)

!Color: White

!Operating Voltage: 13.8 VDC

!Current Draw: Less than 30 mA with min. activity - 44 mA fully active

!Size: 4.658" W x 5.5" H x .95" D (.375" D with recess mount)

Features and Specifications subject to change without notice.

**The local AHJ (authority having jurisdiction) or State and local regulations may prohibit the installation of a M1KPAS Arming Station into an electrical box together with any high voltage circuits. In some cases a special dual voltage box or divider partition (separator) may be successfully used. One known manufacturer of these is "Carlon". Visit your local home center or electrical supply company for availability. Elk specifically warns against improper use, particularly unauthorized installation or servicing in conjunction with high voltage circuits except by licensed and qualified high voltage personnel. Elk is not responsible for damages or harmful consequences. Always consult the local AHJ and follow state and local regulations. In some cases the best solution is to install the M1KPAS into a separate and dedicated single gang box.

PO Box 100 • Hildebran, NC 28637 USA • 828-397-4200 Voice • 828-397-4415 Fax

http://www.elkproducts.com • email: info@elkproducts.com

L610 08/24/06 Page 1