Elmo ExtrIQ Dragonfly/Butterfly manual Installation, Before You Begin, Unpacking the Amplifier

Dragonfly/ Butterfly Installation Guide	Installation
MAN-DRBUIG (Ver. 1.1)

3-1

Chapter 3: Installation

3.1Before You Begin

3.1.1Site Requirements

You can guarantee the safe operation of the Dragonfly and Butterfly by ensuring that they are installed in an appropriate environment.

Feature	Value
Ambient operating temperature	-40 °C to +70 °C (-40 °F to 160 °F)
Maximum relative humidity	95% non-condensing
Operating area atmosphere	No flammable gases or vapors permitted in area

Note: Models for extended environmental conditions are available.

The Dragonfly and Butterfly dissipate their heat by convection. The maximum ambient operating temperature of –40 °C to +70 °C (-40 °F to 160 °F) must not be exceeded.

3.2Unpacking the Amplifier

To unpack the Dragonfly and Butterfly:

Carefully remove the servo amplifier from the box and the Styrofoam.

1.Check the amplifier to ensure that there is no visible damage to the instrument. If any damage has occurred, report immediately to the carrier that delivered your amplifier.

2.To ensure that the Dragonfly or Butterfly you have unpacked is the appropriate type for your requirements, find the part number sticker on the side of the product:

The P/N gives the type designation as follows:

BUT- X/YYY

Continuous Current

(Amps)

Maximum DC

Operating Voltage