Elmo ExtrIQ Dragonfly/Butterfly, DRA- X/YY, BUT- X/YYY manual Safety Information

Dragonfly/Butterfly Installation Guide

MAN-DRBUIG (Ver. 1.1)

1-1

Chapter 1: Safety Information

In order to achieve the optimum, safe operation of the Dragonfly and Butterfly servo- amplifiers, it is imperative that you implement the safety procedures included in this installation guide. This information is provided to protect you and to keep your work area safe when operating the Dragonfly and Butterfly and accompanying equipment.

Please read this chapter carefully before you begin the installation process.

Before you start, ensure that all system components are connected to earth ground. Electrical safety is provided through a low-resistance earth connection.

Only qualified personnel may install, adjust, maintain and repair the servo drive. A “qualified person” has the knowledge and authorization to perform tasks such as transporting, assembling, installing, commissioning and operating motors.

The Dragonfly and Butterfly servo drive contain electrostatic-sensitive components that can be damaged if handled incorrectly. To prevent any electrostatic damage, avoid contact with highly insulating materials, such as plastic film and synthetic fabrics. Place the product on a conductive surface and ground yourself in order to discharge any possible static electricity build-up.

To avoid any potential hazards that may cause severe personal injury or damage to the product during operation, keep all covers and cabinet doors shut.

The following safety symbols are used in this manual:

Warning:

This information is needed to avoid a safety hazard, which might cause bodily injury.

Caution:

This information is necessary for preventing damage to the product or to other equipment.

Note:

This is auxiliary information that ensures the correct operation of the equipment.