User’s Manual
3.3.10TITLE DISPLAY
Users are allowed to name a certain view area and display its title for easy recognition. At this item, users can choose to display or not to display the titles set in advance.
•ON
A title set for certain view will be displayed when the dome back to the view area.
•OFF
When the TITLE DISPLAY is set <OFF>, no title will be displayed on the screen even titles are set in advance.
3.3.11TITLE SETTING
Up to 16 zone titles can be set with maximum 20 characters for each title; two mask zones are allowed to set in a view area. Users can name the zone titles with privacy mask ID numbers for future recognition.
NOTE: For DR model, the available area for setting privacy mask is restricted
within tilt angle 45°.
Follow the steps to set a camera title.
STEP 1: Operate dome to certain view area where you want to set a title for it.
STEP 2: Turn on OSD and select <TITLE SETTING>.
STEP 3: Select a number to indicate the view area.
STEP 4: Press <ENTER> to go into editing mode.
|
|
|
| TITLE SETTING: 01 |
|
| ||||
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | EXIT |
A | B | C | D | E | F | G | H | I | J | SAVE |
K | L | M | N | O | P | Q | R | S | T | LEFT |
U | V | W | X | Y | Z | : | / . | , | RIGHT | |
[ | ] | + | ? | - |
|
|
|
|
| DELETE |
TITLE:
ABC
STEP 5: Choose a character with direction keys and then press <ENTER> to input. Example: <A > <ENTER>, <B> <ENTER>, <C> <ENTER>
TITLE: ABC
STEP 6: To delete entered characters, move the cursor to <LEFT> or <RIGHT> and press <ENTER> to select a character in entry field, then move the cursor to
25
