3.3.14SEQUENCE

User’s Manual

manually by selecting this item.

EXIT

Exit the HOME SETTING menu.

3.3.14SEQUENCE

The function executes pre-positioning of the pan, tilt, zoom and focus features in a certain sequence for a camera. Before set up this function, users must setup at least two preset points.

SEQUENCE

 

SEQUENCE LINE

1

SEQUENCE POINT

01

PRESET POSITION

001

SPEED

1

DWELL TIME

001

RUN SEQUENCE

ENTER

EXIT

YES

SEQUENCE LINE

There are eight sets of sequence lines built in the dome camera. Using LEFT/RIGHT direction keys to select a line first and then set its sequence points.

SEQUENCE POINT

Up to 32 points can be specified for each sequence line. The sequence points represent the orders of the preset points that the dome will automatically run, and the bellowing setup items; PRESET POSITION, SPEED, and DWELL TIME, are related to this item.

PRESET POSITION

Users can assign a specific preset position to the selected sequence point with this item.

SPEED

Users can set the Speed that the dome goes to the next sequence point, and the setup speed range is from 1 ~ 15. Refer to below table for more information.

 

 

PAN (degree/sec.)

TILT (degree/sec.)

 

 

Speed 1

10

8

 

 

Speed 2

23

12

 

 

Speed 3

35

22

 

 

 

 

 

 

29

Page 30
Image 30
Elmo ESD-370 user manual Sequence, PAN degree/sec, TILT degree/sec