Manuals / Elmo / Photography / Security Camera

Elmo ESD-370 user manual Dome ID Setting, Dome Control Protocol, Switch No, Baud Rate

Models: ESD-370

1 44

Download 44 pages 7.04 Kb

Page 11

2.4Dome ID Setting

User’s Manual

Half-duplex

Full-duplex

Pin 3	Termination
Pin 4	Line Lock
Pin 5	Set Factory Default
Pin 6	Reserved

2.4Dome ID Setting

Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the dome ID is 123, the ID switch should be set as below.

NOTE: No two domes should be given the same ID, or communication conflict may occur.

Centesimal

decimal

single digit

NOTE: The number “0” should locate upwards as shown in above diagram for correct switch definition.

2.5Dome Control Protocol

Protocol is a specific set of rules, procedures used for data communications. Basing on the devices of your surveillance system and define the protocol you are going to use. Generally, use one protocol even the devices are provided from different manufacturers. Use the switch to set your dome control protocol and the baud rate. Refer to below table and turn the arrow to choose a protocol for your speed dome.

	Switch No.	Protocol	Baud Rate
	00	VCL	9600
	01	Pelco D	2400
	02	Pelco P	4800
	04	Chiper	9600
	05	Philips	9600

10

Image 11

Elmo ESD-370 user manual Dome ID Setting, Dome Control Protocol, Switch No, Baud Rate

Contents

Integrated High Speed Dome Camera ESD-370User’s Manual User’s Manual CopyrightImportant Information Cautions Overview Content2. Connecting the High Speed Dome Operation and Configuration3.3.13 3.3.18 ALARM DETECT E/F/U Model OnlyError! Bookmark not defined Appendix A Technical Specification1. Overview Precise and Accurate Tracking 1.1 Product FeaturesDay/Night Features Perfect Contrast Solution for High Image QualityIntegrated with Web, Enhanced Internet Capability Optional 1.2 Product ApplicationDynamic Dome Configuration Privacy Mask for Privacy Protection2.1 Package Content 2. Connecting the High Speed DomeRS-485 Communication 2.2 Switch Definition2.3 RS-485 Setting Protocol 2.4 Dome ID SettingSwitch No 2.5 Dome Control ProtocolWhite 2.6 22-Pin Connector DefinitionColor AC24-1Green Alarm Pin Not wiredYellow OrangeDefinition 2.7 Alarm Pin Definition2.8 RS-485 Connector Cable ColorFunction 3. Operation and Configuration3.1 OSD Display Format PositionLayer Default3.2 OSD Menu Tree LayerLayer DefaultLayer LayerLayer DefaultLayer Layer3.3.1 DEFAULT CAMERA 3.3 Configuration MenuAUTO 3.3.2 BACKLIGHT3.3.3 FOCUS 3.3.4 APERTUREV APERTURE 3.3.5 AE MODEAPERTURE MENU H APERTURELight Sources Color Temperature in K3.3.6 WBC MODE 3.3.7 ID DISPLAYFLIP IMAGE/ME/OFF 3.3.8 SETUP MENUDIGITAL ZOOM ZOOM SPEEDSPEED BY ZOOM AUTO CALIBRATIONEXIT ANGLE ADJUSTERRESET SLOW SHUTTER3.3.10 TITLE DISPLAY 3.3.11 TITLE SETTINGALARM TYPE 3.3.12 ALARM SETTINGALARM PIN ALARM SWITCHSEQUENCE 3.3.13 HOME SETTINGALARM ACTION PRESETSEQUENCE PRESETHOME FUNCTION SELECT MODETILT degree/sec 3.3.14 SEQUENCEPAN degree/sec 3.3.15 AUTOPAN PAN degree/sec as endpoint3.3.16 CRUISE 3.3.17 IR FUNCTION Removable IR Cut 3.3.19 WDR Setting DR Model Only3.3.20 PRIVACY H CENTER 000~256 PRIVACY SWITCHSHADE SET MASKFIRST 3.3.21 TIME FUNCTIONMASK CLEAR+RESET MASK DISPLAY3.3.22 SCHEDULE FUNCTION User’s Manual 3.3.23 EXIT OSDIR FUNCTION User’s Manual Appendix A Technical SpecificationAll specifications are subject to change without notice GENERAL User’s ManualLayer OSD Menu NotesUser’s Manual LayerLayer WDR SETTINGUser’s Manual LayerELMO USA Corp 1478 Old Country Rd Plainview, NY