Sharp LC-32GA4X, LC-37GA4X operation manual Input Label, Colour system setting for TV/AV input mode

Useful adjustment settings

Input Label

You can assign each input source a label you like.

1	Press TV/VIDEO to select the desired input
	source.
2	Press MENU and the MENU screen displays.
3	Press c/dto select “Setup”.
4	Press a/bto select “Input Label”, and then
	press ENTER.
5	Press a/b/c/d to select each character
	of the new name for the channel, and then
	press ENTER.
					DVD
		A B C D E					F	G	H	I	J CLEAR
		K L M N O					P	Q	R	S	T BACK
		U V W X Y					Z	+	– .		_
		0	1	2	3	4	5	6	7	8	9 END
						(Example)
6	Repeat the above until the name is fully spelt
	out, and then press ENTER.

•The name can be 6 characters or less.

•When you want to set a channel name of less than 6 characters, select “END”, then press ENTER to exit from the labelling menu.

INPUT SOURCE

TV

INPUT1

INPUT2

DVD

INPUT4

(Example)

NOTE

• You cannot change labels if the INPUT SOURCE is TV.

Colour system setting (for TV/AV input mode)

You can change the colour system to one that is compatible with the image on the screen.

1 Press MENU and the MENU screen displays.

2	Press c/dto select “Option”.
3	Press a/bto select “Colour System”, and
	then press ENTER.
4	Press a/b to select a compatible video
	signal system of your equipment, and then
	press ENTER.
		AUTO
		PAL
		SECAM
		NTSC 3.58
		NTSC 4.43
		PAL-60

NOTE

•Factory preset value is “AUTO”.

•If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

•This function is available for AV input mode and TV tuner mode.

38