Basic adjustment settings
Power control
Power control setting allows you to save energy.
Power control for AV source
No Signal off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
Power control for PC source
Power management
When set, the power will automatically shut down if no signal is input for a certain time.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Power control”.
• Power control menu displays.
3 Press a/b to select “No Signal Off”, and then press ENTER.
4 Press c/d to select “Enable”, and then press ENTER
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
•“Disable” is factory preset value.
•When a TV programme finishes, this function may not operate.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/dto select “Power control”.
• Power control menu displays.
Press a/bto select “Power Management”, and then press ENTER.
Press a/b to select “Mode1” or “Mode2”, and then press ENTER.
Off
Mode1
Mode2
No Operation off
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Power control”.
• Power control menu displays.
3 Press a/bto select “No Operation Off”, and then press ENTER.
4 Press c/d to select “Enable”, and then press ENTER.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Selected item |
| Description | |
|
| ||
Off | • No power management | ||
• | Factory preset value. | ||
| |||
|
|
| |
| • | If no signal inputs for 8 minutes, the power | |
|
| shuts down. | |
Mode1 | • | Even if you start using the PC and the signal | |
| inputs again, the TV stays off. | ||
| • The TV turns on again by pressing POWER | ||
|
| on the TV or POWER on the remote control | |
|
| unit. (See page 14.) | |
|
|
| |
| • | If no signal inputs for 8 seconds, the power | |
|
| shuts down. | |
Mode2 | • When you start using the PC and the signal | ||
| inputs again, the TV turns on. | ||
| • The TV turns on again by pressing POWER | ||
|
| on the TV or POWER on the remote control | |
|
| unit. (See page 14.) | |
|
|
|
NOTE
•When selecting “PC digital” in Input Select and setting “Mode 2” in Power management, the power may not turn back on automatically even if the signal inputs again.
30