Hitachi 42HDW10 user manual Operating Instructions, Turning Power On and Off

OPERATING INSTRUCTIONS

Turning Power On and Off

■To turn the monitor power ON, press the main power switch ( ) on the monitor

main unit to ON, and then press the SUB POWER button or the or button on the remote control.

■To turn the monitor power OFF, press the SUB POWER button or the or button on the remote control, and then press the main power switch ( ) on the monitor main unit to OFF.

•During normal use, the main power switch ( ) is set in the ON position, and the monitor can then be turned ON/OFF using the SUB POWER button or the button on the remote control.

Indicating lamp	Power status		Operating
Off	Off	When the main power switch		is set to
		OFF.
		When the main power switch (		) is ON,
Lights red	Off	and the	button on the
		remote control or the SUB POWER button
	(standby)
		on the underside of the front of the frame
		is OFF.
Lights or blinks		When the main power switch (		) is ON,
	On	and the	button on the remote control or
green		the SUB POWER button on the underside
		of the front of the frame is ON.

ENGLISH

•When the indicating lamp blinks in green or the message “POWER SAVE” or “OUT OF FREQUENCY” appears on the screen, there is something unusual about the status of reception. See “Symptoms That Seemingly Appear to be Failures.” 23

Main power switch

SUB POWER

Main unit	Remote
	controller

TIPS

•Avoid repeatedly turning the monitor on and off at short time intervals. Failures might result from such operation.

•Turn off the main power switch ( ) before leaving the monitor out of use for an extended period of time.

•If a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.

9