Hitachi 42HDW10 user manual Composite / S input Video 1 input, Component input Video 1 input

ENGLISH

PRODUCT SPECIFICATIONS (continued)

Recommended Signal List (continued)

Composite / S input (VIDEO 1 input)

		Signal mode		Horizontal	Dot clock
No.						Remarks
	Signal Name	Resolution	Vertical	frequency (kHz)	frequency (MHz)
			frequency (Hz)
	NTSC
1	NTSC-4.43	525	59.94	15.73	-
	M-PAL
	PAL
2	N-PAL	625	50.00	15.63	-
	SECAM

Component input (VIDEO 1 input)

		Signal mode		Horizontal	Dot clock
No.						Remarks
	Signal Name	Resolution	Vertical	frequency (kHz)	frequency (MHz)
			frequency (Hz)
1	480/60i	480	59.94	15.73	-
2	575/50i	575	50.00	15.63	-
3	480/60p	480	59.94	31.47	-
4	720/60p	720	59.94	44.96	-
5	1080/60i	1080	60.00	33.75	-
6	1035/60i	1035	60.00	33.75	-

•The type of video board or connecting cable used may not allow for correct displays adjustment of H.POSITION, V.POSITION, CLOCK and PHASE.

•The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.

•The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same signal.

•Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of stripes.

•Use of this monitor with the input signal timings specified below is recommended. A predefined setting may not be reproduced correctly with an extremely long front porch or back porch or with an extremely short data display time.

		Front porch	Sync width	Back porch	Blanking width
	Horizontal frequency	0.2 µs or more	1.0-4.0 µs	1.2 µs or more	3.5 µs or more
Horizontal	24 kHz to 52 kHz
timing	Horizontal frequency	0.2 µs or more	0.8-3.0 µs	1.1 µs or more	2.3 µs or more
	52 kHz to 107 kHz
Vertical timing		9 µs or more	25 µs or more	400 µs or more	450 µs or more

30