ENGLISH
INSTALLATION INSTRUCTIONS (continued)
Handling the Remote Controller
Loading Batteries
1)Open the battery cover.
•Slide the battery cover towards the arrow mark while pressing it.
2)Load batteries.
• Load two Size AA batteries included observing the correct polarities.
3)Close the battery cover.
•Slide back the battery cover towards the arrow mark.
Handling the Remote Controller
•Use the remote controller within about 5 m from front of the unit’s
sides.
With in 30 | With in 30 |
degrees | degrees |
About 3m | About 3m |
About 5m
| • Do not use new and old batteries together. The batteries could | |
| explode or leak, resulting in fires, physical injury, or stains. | |
CAUTIONS | • When loading batteries, observe their correct polarities as marked on | |
the product. If loaded in the wrong direction, the batteries could | ||
| explode or leak, resulting in fires, physical injury, or stains. | |
|
| |
| • Do not drop or impact the remote controller. | |
| • Do not splash the remote controller with water or put it on a wet | |
| object to avoid possible failures. | |
| • Before leaving the remote controller out of use for an extended | |
TIPS | period of time, remove the batteries from it. | |
• If the remote controller begins to lack responsiveness, replace the | ||
| ||
| batteries. | |
| • Strong light such as direct sunlight impinging on the photoreceptor | |
| of the remote control can cause operational failure. Position this unit | |
| to avoid direct contact with such light. | |
|
|
8
