Pentax 14071 specifications Using the Power Saving Function, Setting the Auto Power Off Function

Use the four-way controller (23) to select [Power Saving] in the [W Setting] menu.

Press the four-way controller (5). A pull-down menu appears.

Using the Power Saving Function

You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed.

1

2

3 Use the four-way controller (23) to select the time until the camera enters the power saving mode.

Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].

4 Press the 4 button.

The setting is saved.

• Power Saving does not function in the following situations:

- While taking pictures in j (Continuous Shooting) or q(Burst Shooting) mode

-In playback mode

-While recording a movie

-While the camera is connected to a computer

-While a menu is being displayed

•When no operation is performed after the camera is turned on, the Power Saving function is activated only after 15 seconds elapse even if [5sec.] is set.

Setting the Auto Power Off Function

You can set the camera to turn off automatically when no operation is performed for a fixed time.

1 Use the four-way controller (23) to select [Auto Power Off] in the [W Setting] menu.

6 Settings

133