Pentax 14071 Correcting Defective Pixels in the CCD Sensor Pixel Mapping, To select Pixel

choose the PENTAX logo screen or the Guide Display Start-up screen already stored in the camera.

4 Press the 4 button.

The start-up screen is set.

• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card/built-in memory is formatted.

•The start-up screen is not displayed when set to [Off].

•The start-up screen is not displayed when the camera starts up in playback mode.

Correcting Defective Pixels in the CCD Sensor (Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels in the CCD sensor. Run the Pixel Mapping function if image dots always seem to be defective in the same place.

1	Use the four-way controller (23) to select [Pixel
	Mapping] in the [W Setting] menu.
2
	Press the four-way controller (5).
	The [Pixel Mapping] screen appears.
3
	Use the four-way controller
		Pixel Mapping
	(23) to select [Pixel
			Checks the image sensor
	Mapping].		and corrects defective
			pixels
			Pixel Mapping
			Cancel
			OK OK

4 Press the 4 button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Charge the battery or replace it with a fully charged battery.

6 Settings

135