Pentax 14071 specifications Messages, Built-in memory full

8 Appendix

Messages

Messages such as the following may appear on the display during camera operation.

Message	Description
Battery depleted	The battery is exhausted. Charge the battery using the
	power adapter D-PA116 (p.31).
	The SD Memory Card is full and no more images can be
	saved.
Memory card full	Insert a new SD Memory Card or delete unwanted images
	(p.34, p.98).
	Change the number of recorded pixels of recorded images
	and try again (p.105).
Built-in memory full	Displayed if the built-in memory is full when saving a file.
	Shooting and playback are impossible due to a problem
Memory card error	with the SD Memory Card. You may be able to display or
	copy the images on the card using a computer.
The built-in memory is	The data within the built-in memory is damaged. Format the
not formatted	built-in memory.
	The SD Memory Card you have inserted is unformatted or
Card is not formatted	has been formatted on a computer or other device and is
	not compatible with this camera. Format the SD Memory
	Card in the camera (p.123).
Card is locked	The SD Memory Card is write-protected (p.6).
	This message appears when the camera fails to compress
Compression error	an image. Change the number of recorded pixels of the
	image and try shooting or saving it again.
No image	There is no image on the SD Memory Card or in the built-in
	memory.
	This message appears when the internal temperature of the
Movie recording stopped	camera has exceeded normal operating limits while
	recording a movie.
The camera will turn off	The camera turned off because it has overheated. Wait until
to prevent damage from	it cools down and then turn it back on.
overheating
Deleting	This message appears while deleting an image.
Camera cannot play	You are trying to play back an image in a format not
	supported by this camera. You may be able to play it back
this image and sound
	on another brand of camera or on your computer.

150