1 GettingStarted

• Do not use the power adapter D-PA116 to charge batteries other than the rechargeable lithium-ion battery D-LI108, as the adapter may overheat or be damaged.

Make sure that the battery has been inserted correctly and the cable is connected properly if the self-timer lamp blinks.

Replace the battery with a new one in the following cases:

-If the battery starts to run down more quickly (the battery may have reached the end of its service life)

-If the self-timer lamp does not light or blinks even after being charged (the battery may be faulty)

The time required to fully charge the battery is about 130 minutes (at

room temperature of 25°C). However, the charging time may vary depending on the ambient temperature and charging conditions. The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F).

The rechargeable lithium-ion battery D-LI108 can also be charged using the optional battery charger D-BC108.

The battery cannot be charged using a computer or similar devices. Do not attempt to charge the battery by connecting the USB cable to a computer.

Image Storage Capacity, Movie Recording Time, and Playback Time

(at 23°C with the display on and the battery fully charged)

 

 

 

 

Image Storage Capacity*1

Movie Recording Time

*2

*2

(flash used for 50% of shots)

 

Playback Time

Approx. 200 pictures

Approx. 70 min.

 

Approx. 130 min.

*1 Image Storage Capacity shows the approximate number of shots recorded during CIPA-compliant testing (with display on, flash used for 50% of the shots, and 23 degrees centigrade). Actual performance may vary according to operating conditions.

*2 According to the result of in-house testing.

• In general, battery performance may temporarily deteriorate as the temperature decreases.

Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.

32

Page 34
Image 34
Pentax 14071 specifications At 23C with the display on and the battery fully charged