Sharp LC-37GA4X Using external equipment, Connecting external speakers, External Audio Bypass

Using external equipment

Speaker Setup

Connecting external speakers

Rear view

External Audio Bypass

External Audio Bypass automatically optimises the audio quality to suit supplied speakers.

1 Press MENU and the MENU screen displays.

2	Press c/dto select “Setup”.
3	Press a/bto select “Speaker Setup”, and
	then press ENTER.
4	Press a/b to select “External Audio
	Bypass”, and then press ENTER.
5	Press c/dto select “Yes” or “No”, and then
	press ENTER.
Selected item		Description
No		Sets the optimum audio for the supplied
		speakers.
Yes		When you are using your own speakers,
		output the original sound.

NOTE

How to connect the

speaker cable

1Pull up the

lid.

2Insert the edge of the

cable.

3Put the lid back down.

•When using external speakers, make sure to set “External Audio Bypass” to “Yes”.

•When Dolby Virtual is on, External Audio Bypass automatically sets to “Yes”.

Make sure to connect the speaker terminal and cable polarity (L, +) properly

•The speaker terminal has plus (L) and minus (+) polarity.

•Plus is red and minus is black.

•The cables are also divided into plus and minus.

•When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.

NOTE

•Unplug the AC cord from the AC outlet before installing the speakers.

CAUTION

•Make sure external speakers have 4 ohm and 10 watt specifications.

•Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short.

35