Elo TouchSystems 1729L manual Enable 2-D Scanning

The Scan Engine turns on the laser and is able to scan and decode barcodes con- tinuouslywithout the user having to press the trigger (momentary switch). When the Host Appli-cation software detects the DSR input HIGH (HE Switch is OFF), it sends a ‘LevelTrigger’ SSI command to the Symbol Scan Engine. The Scan Engine turns off the laserand will scan and decode barcodes only when the trigger is activated.

Enable 2-D Scanning:

Your scanner default settings do not enable 2-D barcode reading ability. In order to enable this option, follow these steps:

1)Scan the barcodes below to enable PDF417 and MicroPDF417. These are both types of 2-D barcodes.

2)Now scan the barcode below to change your scanning pattern. Using this scanning pattern will allow you to read 2-D barcodes (you can still read 1-D barcodes also).

*Note: These barcodes (higher resolution) can also be found in the integration guide for the barcode scanner, which is located in the TouchTools CD.

2-23