Panel Cut Outs, Mounting Options | Elo TouchSystems 1947L manual

Panel Cut Outs

The following applies to all mounting options:

1All drawing centers are the center of the viewable area.

2LCD panel cutout dimensions in the horizontal mount option applies to the vertical mount option.

3If the kiosk material is wood:

1 Ø4.5 holes through for M4 screws with nuts.

2 If there are no through holes then screws for wood Ø4.

4If the kiosk material is sheet metal, use concealed head threaded studs M4 with nuts.

NOTE: Dimensions are for non-touch, AccuTouch and IntelliTouch only. For SecureTouch add 4mm to each dimension.

2-6E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e