Recommended separation distances between portable and mobile RF communications equipment and the 2401LM Touchmonitor for Healthcare Applications for all EQUIPTMENT AND SYSTEMS that are not
The 2401LM Touchmonitor for Healthcare Applications is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the 2401LM Touchmonitor for Healthcare Applications can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications (equipment) and the 2401LM Touchmonitor for Healthcare Applications as recommended below according to the maximum output power of the communications equipment.
Rated Maximum | Separation Distance According to Frequency of Transmitter | ||
| m |
| |
Output Power of |
|
| 800 MHz to 2.5 GHz |
150 kHz to 80 MHz | 80MHz to 800 MHz | ||
Transmitter |
|
|
|
(W) |
|
|
|
|
|
| 0.23 |
0.01 | 0.12 | 0.12 | |
|
|
| 0.74 |
0.1 | 0.37 | 0.37 | |
|
|
| 2.3 |
1 | 1.2 | 1.2 | |
10 | 3.7 | 3.7 | 7.4 |
|
|
| 23 |
100 | 12 | 12 | |
|
|
|
|
For transmitters rated at a maximum output power not listed above, the recommended separation distanced in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
| User Manual 2401LM |
© 2013 Elo Touch Solutions, Inc. All rights reserved. | SW200127 Rev A - Page 10 of 32 |
