OSD Function Description

Item	Function
Brightness	To increase or decrease the brightness.
Contrast	To increase or decrease the contrast.
Frequency	To adjust frequency (dot clock).
Phase	To adjust phase (clock-phase).
Vertical.	To move the screen upward or downward
Horizontal	To move the screen left or right.
OSD Hor Pos	To move OSD menu left or right.
OSD Ver Pos	To move OSD menu upward or downward.
OSD Background	Choose between Opaque and Translucent.
User Timeout	Set OSD screen appearing time.
Color Temp	Choose between Default, System1, Sytem2, Sytem3, System4 for
	color temp.
Red	Balance Red.
Green	Balance Green.
Blue	Balance Blue.
DPMS	Enable or Disable DPMS.
Auto Source Select	Enable or disable auto source selection.
Freeze Frame	Enable or disable freeze frame.
Zoom	Enable zoom-in function.
Scale Mode	Choose scale mode between “Fill Screen”, “Aspect Ratio”, “One to
	One”
Input Source Select	Choose input source between “Analog RGB”, “Composite Video”,
	“Super Video”
Auto Adjust	Press + to turn on this function. The Auto-Adjust will automatically
	adjust V-Position, H-Position, Frequency, Clock-Phase. The whole
	process takes about 5 seconds. (Please use the test pattern file in the
	attached LCD monitor utility disk for Auto Adjust)
Factory Reset	Set to factory default.
Information	Display information on resolution, refresh rate and input mode.

Elo TouchSystems AMM15TK2-TEW OSD Function Description, Under Analog RGB Display