2-10 IntelliTouch/SecureTouch Guide
Summary of Installa tio n Ste p s
The CRT installation process consists of the following steps:
1Incoming inspection
2Disassembling the monitor
3Attaching the touchscreen to the CRT
4Installing the controller
5Routing the touchscreen cables
6Reassembling the monitor
7Sealing the monitor
Specific compatibility may not be confirmed until well into the installation.1
IntelliTouch touchscreens can be installed on most types of CRT displays.
Figure 2.3 shows a typical installation.
Figure 2.3
Typical IntelliTouch Touchscreen Installation
Most displays require complete disassembly, including removal of the CRT, to
install a touchscreen. Disassembling the display ca n be a da ngerous pr oce dure if
done improperly. Any damage to the display or the touchscreen as a result of
improper installation is the installer’s responsibility. Without prior approval of
the display manufacturer, you will probably void the display’s warranty by
disassembling it. Also, it will be necessary to recertify the display and
touchscreen system for regulatory agencies such as FC C, CE and U L/C SA if
those certifications were originally present and need to be maintained for your
intended application.
1. To complete the first integration may take several hours.