B-62 IntelliTouch/SecureTouch G uide
IntelliTouch Touchscreens

Mechanical

Construction Glass panel with transducers attached to fr ont surface of the glass. Glass panel thickness
nominally 0.115-inch (3 mm). Corne r-mounted transducers add maximum of 0.150-inch
(4 mm). Beveled flat screens have transducers attached to a beveled edge of the glass.
Dimensions The following physical dimens ions o f t he t ou chscr een are sp ecifi ed for each m o del in th e
IntelliTouch Touchscreen Products br oc hure o r the a ppr opria te Elo Sp eci fic at ion Con trol
Drawing. Drawings can be found on Elo’s web site, www.elotouch.com
Horizontal and Vertical physical size
Horizontal and Vertical border region size
Horizontal and Vertical touch active area size
Radius of curvature information
Cable exit location, length, and connector type
Cable and
Connector Cable typically exit s from the right side, terminating in a 2x6 f emale, 0.025-inch (0. 635
mm) square post receptacle with 0.100-inch (2.54 mm) centers.
Positional
Accuracy Standard deviation of error is less than 0.080 in. (2 mm).
Resolution 4096 x 4096 touch points (approximately 400 touch points per linear inch)
Touch Activation
Force Typically 2 to 3 ounces (55 to 85 grams).
Surface
Durability Surface durability is that of glass , M ohs’ hardness rating of 7.
Expected Life
Performance No known wear-out mechani sm , as there are no layers, coatings, or moving parts. The
IntelliTouch technology has been operationally tested to more than 50 million touches in
one location without failure, using a stylus similar to a finger.

Optical

Light
Transmission 90% per ASTM D1003-92
Visual Resolution Clear surface: Excellent with no noticeable degradation.
Anti-glare surface: 6:1 min im um.
All measurements made using USAF 1951 Resolution Chart, under 30X magnification
with test unit located approximately 1.5-inc h (38 mm) from surface of resolution chart.
Gloss Clear surface: N/A
Antiglare: 75 ± 15 gloss units per ASTM D2457- 90 using a 60° gl oss mete r. Fo r flat s, 85
± 15 gloss units per ASTM D2457-90.
Electrical All touchscreen drive signal s are developed by the interfa ci ng co nt ro ll er . Refer to the
Technical Reference Manual for your contr o ller or to the IntelliTouch Touchscreen
Products brochure for these specific ations.

Environmental

Temperature Operating: -20°C to 50°C.
Storage: -40°C to 71°C.
Operating
Relative Humidity 40°C at 90% Rh, non-condensing.