Elo TouchSystems ESY1529L manual Serial Interface Pass-thru Models Installation

Models: ESY1529L

1 142
Download 142 pages 16.34 Kb
Page 128
Image 128

Serial Interface Pass-thru Models Installation

1Mount the pole display to the metal base plate using the mounting hardware provided.

2The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware.

3Connect the DB25M connector to the peripheral device or a serial pass-thru terminator (optional accessory). Turn on power of the peripheral device.

4Connect the DB9F connector to the computer’s serial COM1 or COM2 port.

5Connect the female phone jack of the power adapter to the male phone jack of the pole display cable.

6Plug the power adapter into a 120VAC outlet.

7A start up text message (LOGIC CONTROLS POS COMPONENTS) will be present for a short time. When this message disappears the cursor will be displayed at the left- most digit of the top row.

Parallel Interface Pass-thru Models Installation

1Mount the pole display to the metal base plate using the mounting hardware provided.

2The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware.

3Connect the DB25F connector to the peripheral device or parallel pass-thru terminator (optional accessory). Turn on power of the peripheral device.

4Connect the DB25M connector to the computer’s parallel printer port (LPT1).

5Connect the female phone jack of the power adapter to the male phone jack at the DB25M/DB25F connector.

6Plug the power adapter into a 120VAC outlet.

7A start up text message (LOGIC CONTROLS POS COMPONENTS) will be present for a short time. When this message disappears the cursor will be displayed at the left- most digit of the top row.

4

Page 128
Image 128
Elo TouchSystems ESY1529L manual Serial Interface Pass-thru Models Installation