Elo TouchSystems ET1529L manual Trackdatasendflags Property

USB HID Keyboard Emulation Swipe Reader

TRACK_DATA_SEND_FLAGS PROPERTY

Property ID:	4
Property Type:	Byte
Length:	1 byte
Get Property:	Yes
Set Property:	Yes
Default Value:	63 (hex)
Description:	This property is defined as follows:

0

SS

ES LRC

0

LC

Er Er

SS0 – Don’t send Start Sentinel for each track

1 – Send Start Sentinel for each track

ES	0	– Don’t send End Sentinel for each track
	1	– Send End Sentinel for each track
LRC	0	– Don’t send LRC for each track
	1	– Send LRC for each track
	Note that the LRC is the unmodified LRC from the track data. To verify the LRC
	the track data needs to be converted back from ASCII to card data format and the
	start sentinels that were modified to indicate the card encode type need to be
	converted back to their original values.
LC	0	– Send card data as upper case
	1	– Send card data as lower case
	Note that the state of the Caps Lock key on the host keyboard has no affect on
	what case the card data is transmitted in.
Er	00 – Don’t send any card data if error
	01 – Don’t send track data if error
	11 – Send ‘E’ for each track error

This property is stored in non-volatile EEPROM memory so it will not change when the unit is power cycled. When this property is changed, the unit must be power cycled to have these changes take effect. If a value other than the default value is desired, it can be set by the factory upon request.

18