CD / MP3 / WMA OPERATION
PROGRAMMING
Up to 20 tracks can be programmed for disc playback in any order.
Be sure to press the “STOP” button before use.
1.Press the “PROGRAM” button on the remote control, the display will show “P01” and flash.
2.Select the desired track by using the “SKIP +” or “SKIP
3.Press the “PROGRAM” button on the remote control again to confirm the desired track into the program ming memory.
4.Repeat step 2 and 3 to enter additional tracks into the programming memory.
5.When all the desired tracks have been programmed, press the “PLAY / PAUSE / USB” button to play the disc in the order you have programmed.
6.Press the “STOP” button twice to terminate the programmed playback.
MODE
Press the “MODE” button before or during playing CD / MP3 / WMA disc, each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM (*MP3 / WMA ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
RAND
NORMAL RANDOM
PLAYBACK
| SPECIFICATIONS |
GENERAL |
|
Power supply : | AC 230V ~ 50Hz |
Frequency range : | AM 525 - 1615kHz |
| FM 87.5 - 108MHz |
(Specification subjects to be changed without notice.)
15.
