REMOTE CONTROL UNIT
By using the provided remote control unit, the receiver can be controlled from your listening position.
To use the remote control unit, point it at the REMOTE SENSOR window of the receiver.
Notes:
zEven if the remote control unit is operated within the effective range, remote control operation may not work if there are any obstacles between the unit and the remote control.
zIf the remote control unit is operated near other products that generate infrared rays, or if other remote control devices using infrared are used near the unit, it may operate incorrectly.
zTo simplify explanation, this manual refers to names of buttons and controls on the front panel, making no mention of the use of remote control unit.
zThe power is turned on/off (standby) by pressing the POWER button on the remote control unit in standby mode.
Precautions concerning batteries
zBe sure to insert the batteries with correct positive+ and negative – polarities.
zUse batteries of the same type. Never use different types of batteries together.
zDo not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
BATTERY INSTALLATION
1.Remove the battery compartment cover.
2.Insert two “AAA” dry batteries.
Make sure that the batteries are inserted with their positive “+” and negative
3.Close the cover until it clicks.
If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case, replace the batteries with new ones.
12
